AAA POWDER COATINGS

AAA GRILL CRAFTS

2008-04-15T08:01:00.000-07:00

AAA GRILL CRAFTS

opening on May 1

AAMA specifications below

2008-03-27T06:54:00.002-07:00

Test Parameter
AAMA 2603-02
AAMA 2604-05
AAMA 2605-05
Pretreatment
Metal Preparation and
Multi stage cleaning and pretreatment
Multi stage cleaning and pretreatment
Multin stage cleaning and pretreatment
Requirements
Pretreatment
Pretreatment Type
Chemical conversion coating
Non-Chrome per suppliers spec's
Non Chrome per suppliers spec's
Paint Film
Dry film thichness
2-3 mils min.
2-3 mils min.
2-3 mils min.
Requirements
Sealant Compatibility
Meets AAMA 800
Meets AAMA 800
Meets AAMA 800
Dry Hilm Hardness
H Minimum
H Minimum
H Minimum
Adhesion
Dry Adhesion
0% failure (no loss)
0% failure (no loss)
0% failure (no loss)
Requirements
Wet Adhesion
0% failure (no loss)
0% failure (no loss)
0% failure (no loss)
Boiling Water Adhesion
None specified
0% failure (no loss)
0% failure (no loss)
Impact: Resistance
No removal of film from substrate
No removal of film from substrate
No removal of film from substrate
Abrasion Resistance-ASTM D968
None specified
Abrasion coefficient value=20 min
Abrasion coefficient value=40 min.
Chemical
Muriatic Acid Resistance
15 min spot test: no blistering or visual change
15 min spot test: no blistering or visual change
15 min spot test: no blistering or visual change
Resistance
Mortar Resistance
24 hour pat test: no loss of film adhesion or color change
24 hour pat test: no loss of film adhesion or color change
24 hour pat test: no loss of film adhesion or color change
Requirements
Nitric Acid Resistance
none specified
24 hour exposure: no blistering or visual change
24 hour exposure: no blistering or change
Detergent Resistance
72 Hour eposure: no loss of film adhesion, no blistering
72 Hour eposure: no loss of film adhesion, no blistering
72 Hour eposure: no loss of film adhesion, no blistering
Window Cleaner Resistance
none specified
24 hour exposure: no blistering or visual change
24 hour exposure: no blistering or visual change
Corrosion
Humidity Resistance
1,500 hours: no more than a few blisters size 8 figure #4
3,000 hours: no more than a few blisters size 8 figure #4
4,000 hours: no more than a few blisters size 8 figure #4
Resistance
ASTM D 714
ASTM D 714
ASTM D 714
Requirements

Salt Spray Resistance

1,500 hours of salt solution: minimum rating 7 on scribe or cut edges; minimum blister rating of 8 in the field
3,000 hours of salt solution: minimum rating 7 on scribe or cut edges; minimum blister rating of 8 in the field
4,000 hours of salt solution: minimum rating 7 on scribe or cut edges; minimum blister rating of 8 in the field
(ASTM D 1654)
(ASTM D 1654)
(ASTM D 1654)
Weathering
Accelerated Exposure
none specified
none specified

Powder Coating

2008-03-27T06:54:00.001-07:00

AAA Powder Coating, Inc. services and processes are known for high quality and broad capabilities. Power coating often provides better adhesion, durability and chemical resistance than liquid coatings. Power coating is also environmentally friendly, free of solvents and is easy to reclaim and recycle.
Environmental Compliance
Powder Coating’s efficiency, economy, and energy savings works for the environment as well, as this process eliminates VOCs – meaning the air is environmentally safer. Installation, expansion and running of a powder coating operation is significantly simplified, creating the potential to place a powder coating finishing operation in areas where other production systems would not be permitted. The employees also love powder coating’s reduced housekeeping problems and minimum contamination of clothing, since dry powder does not emit the kinds of fumes liquid paint does.

2008-03-27T06:50:00.000-07:00

Services
Ø Responsive turn-around times.

Ø Media Blasting and metal restoration services.

Ø Custom color match powder our specialty. Powders can be custom matched for color, sheen and in most cases texture. This service allows our customers to offer options to the end users not available until now

.
Ø Companion touch-up paint is readily available and can be provided with every job if required by the customer.
Ø Fabricator location service and job coordination services are available.

Ø First article Powdercoating available for submittals.

Equipment
Ø Entire facility overhead conveyor system by Powder Coating Systems Inc.

Ø 5 stage aluminum / iron phosphate pretreatment system by PEM Corporation with non-chrome sealer. Chemicals by Calvary Industries.

Ø Audited 4 pass batch oven with intelligent heat processor 24’L x 11’H x 11’W

Ø Single pass application booth with dual operator capability 40’L x 11’H x 15’W

Ø New technology application equipment by Nordson Corporation.

Ø Large climate controlled powder storage facility.

Available Powder Coating Products
Epoxy – Best suited for interior applications excellent choice where mechanical and chemical resistance is required
Urethane- Best suited for interior and exterior applications. Not suitable for high film buildup. Excellent choice for light fixtures, auto trim and furniture.
TGIC Polyester - Best suited for interior and exterior applications. Formulated to meet the requirements of the AAMA 2603 specification. Excellent choice where gloss, chemical resistance, wide color range (custom colors are available), and weatherablity are a concern. Typical uses include aluminum extrusions, playground equipment, machinery, and agriculture equipment. FDA approved powders are also available in this range.
Super Durable TGIC Polyester – Formulated to meet the requirements of the AAMA 2604 specification. Products in this series are offered in a wide range of colors (custom colors are available), and offer enhanced weatherability. Products in this series have a slightly reduced gloss range. Proper chemical pretreatment including non-chrome sealer is critical for product performance.
Highest Exterior Performance Organic Systems - Formulated to meet the requirements of the AAMA 2605 specification. Products in this series have a slightly reduced gloss range and have a more limited stock color range (custom colors are available). Proper chemical pretreatment including non-chrome sealer is critical for product performance (Sandblasting may not be used). A technical representative of each powder manufacturer must audit each application system to insure products will meet 2605 specification. Applicator must be certified to purchase and apply this powder.

Welcome to AAA Powder Coating,

2008-03-27T06:47:00.000-07:00

AAA Powder Coating, Inc. founded in,2008, is the fastest growing powder coating company in Tamilnadu. Our services and processes are known for high quality and broad capabilities. Powder coating often provides better adhesion, durability and chemical resistance than liquid coatings. Powder coating is also environmentally friendly, free of solvents and is easy to reclaim and recycle.
Our clients include metal fabricators, shutter companies, sign companies, developers, contractors, glass and aluminum extrusion companies as well as OEM suppliers for the aviation, automotive and construction equipment industries.

POWDER COATING MATERIALS....

2008-03-23T09:25:00.001-07:00

2008-03-22T22:02:00.000-07:00

Triple 'A' Powdercoatings.

opening soon...........